HD HIGH CASTER - $699 If you're lifted and abuse your rig jumping, etc. HIGH CASTER - $449 If you are lifted 2-4" (INSTALLED) STOCK REPLACEMENT - $449 If you have no lift Also, Tacoma guys have been running JBAs for a couple of years and they get excellent reviews over on Tacomaworld. JBA is a new player in the Toyota world, but their UCAs are extremely well respected in the Jeep world. ![]() (Their uniballs are only $699 )Ĭamburgs are beautiful, but they weren't for me. These are $599 for a pair of arms and all the hardware with the covers, and $529 without the cover. These ball joints press in, which is a pain to me if they need to be replaced (have to take them off?). So crud and salt could build up in there, and you have to buy a plastic cover (another $40) that seemed like it could easily pop off (and you'd never know it). ![]() There is nothing wrong with them except for the MOOG ball joint haters.īut the thing that bugged me was that the top of the uniball was open. Living in the rust belt, there are basically two choices for aftermarket Upper Control Arms in 2017:Ĭamburg is one of the best brands of UCAs. I didn't see any detailed UCA install threads anywhere and would like to contribute to the site. ![]() Use at your own risk! Use common sense, jack stands, safety glasses, and never use regular sockets on an impact!!*** Always follow the manufacturer's instructions and torque to spec. ***You can use this write up for UCAs with our 4th Gens.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |